Is a two-layer sealing-ventilating tape for use on horizontal and diagonal ridges. By using special connection system of two materials, a PP geotextile with nonwoven polyethylene (PE) C-roll S is a long-life tape retaining properties and performance characteristics. By introducing innovative aluminum wave posture we have gained 80% stretchability, thanks to this the product is more effective and easier to install for all types of tiles.

Is a two-layer sealing-ventilating tape for use on horizontal and diagonal ridges. By using special connection system of two materials, a PP geotextile with nonwoven polyethylene (PE) C-roll S Plus is a long-life tape retaining properties and performance characteristics. By introducing innovative aluminum wave posture we have gained 80% stretchability, thanks to this the product is more effective and easier to install for all types of tiles. We have increased the surface area through implementing additional ventilation holes in the fabric through which the hot air accumulating under the roof slope is much faster discharged to the outside of the roof.

is a sealing-ventilating tape for use on horizontal and diagonal ridges. The fabric used in this tape is a polypropylene (PP), which has a special UV stabilization additives. By introducing innovative aluminum wave posture we have gained 80% stretchability, thanks to this the product is more effective and easier to install for all types of tiles.

is a sealing-ventilating tape for use on horizontal and diagonal ridges. Used in this type of a tape polypropylene Typar with UV stabilization up to 6 months is a highly specialized resource providing long life span and proper drainage of water vapor. By introducing innovative aluminum wave posture we have gained 80% stretchability, thanks to this the product is more effective and easier to install for all types of tiles.

is an absolutely innovative product, thanks to its specific structure extensibility of the whole strip reaches 40% and by using textile 110g/m² we have obtained long-term strenght and weather resistance. In the middle part of textile is provided a 30mm width aluminum strip which prevents tear of the fabric during installation. The tape has high pearmeability air, thanks to its efficiently and quickly discharged warm air from the roof covering to outside of the roof.

is a sealing-ventilating tape for use on horizontal and diagonal ridges. The fabric used in this tape is a polypropylene (PP), which has a special UV stabilization additives. By introducinginnovative aluminum wave posture we have gained 70% stretchability, thanks to this the product is more effective and easier to install for all types of tiles.

is a ventilating and sealing tape for use on sloping and horizontal ridges. It is made of single-layer lacquered aluminum strip, UV resistant. The use of special vents provides protection from rain and insects. The tape can be used to bituminous covers, shingles and metal sheet roofing tiles.

is an absolutely innovative product, thanks to its specific structure extensibility ofthe whole strip reaches 40% and by using textile 110g/m² we have obtained long-term strenght and weather resistance. In the middle part of textile is provided a 30mm width aluminum strip which prevents tear of the fabric during installation. The tape has high pearmeability air, thanks to its efficiently and quickly discharged warm air from the roof covering to outside of the roof.

Sealing-ventilation tape to be used on sloping and level roof ridges. The PP geotextile used in that kind of tape with UV stabilizing up to 6 months is a very highly specialist raw material, which ensures double protection: water tightness and proper water vapour removal.

Batten support bracket- Type 2 is made of galvanised steel. It is kind of protection for the horizontal ridge batten at the apex of the rafters, when the dry ridge system is fitting. There are four different bend points on the bracket, which accommodate for a range of roof pitches and tile heights and are designed to hold a single batten.

The hip clip is used to attach ridges and in baskets roofs for roof construction (respectively for ridge battens or load-bearing battens).
The clip is made of the highest quality materials: stainless steel sheet, corrosion resistant, which guarantees high quality products, long life and resistance to weather conditions.

polypropylene joiner is 50mm wide, 320 mm length, has cuts on both sides so that adapts more easily to the roof, there are two smaller clips and one large clip inside which are made of polyamide.

polypropylene joiner is 50mm wide, 320mm length, is without cuts on both sites, fitted by two smaller clips on both sides and one large central clip, all are made of polamid.

polypropylene joiner is 50mm wide and 320 length with rounded whole in the middle, is fitted by polyamide or steel cup with a non-rusting or galvanized steel screw and two polyamide clips at their sides.